How to Charge a 3DS With a Phone Charger

If you’ve been trying to figure out how to charge a 3DS with a phone charger, then you’ve come to the right place. In this article, you’ll learn how to do it with a 3DS, DSi XL, or 2DS. However, you should consider your particular model before proceeding.


Charging your Nintendo 3DS with a phone charger is one option if the port on the console is damaged or has shorted out. If this is the case, you can use an external battery pack, portable power bank, or extra-long phone charger to power the system. However, this method is not perfect and may not work with all 3DS models.

You can also use a USB cable to charge your 3DS. You will need a USB cable and an AC adapter. The USB cable can be connected to a wall outlet or a USB port. When the USB cable is plugged into the 3DS, you should see a charge indicator. You can also check your battery level in the system menu. To do this, tap the Settings menu and choose System > Battery.

You can also use a Micro USB cable to charge your device. The micro USB connector is actually a smaller version of the regular USB connector. It has two crimped sides and is sometimes referred to as the mini-B connector. It will take about four hours to fully charge your Nintendo DS. The charging light will turn off when the battery has reached its maximum capacity. This means you can play on your Nintendo DS while it charges.

An iPhone charger is another option for charging your Nintendo 3DS. It is slimmer and less bulky than a regular charger and will allow you to carry your device around without the need for a separate charger. Additionally, it is possible to find a Micro-USB to 3DS power adaptor that costs only a few dollars.

If you are worried about the safety of the phone charger, there are a few things you should know about it. First of all, make sure you know the type of charger you have before you buy one. Make sure to read the instructions and safety information on the adapter. The charger you purchase should be compatible with the model you’re charging.

Next, make sure that the phone charger is USB C compatible and has the correct power potential for your console. The charger should also have a capacity of 1 W or higher. Using a lower capacity phone charger will reduce the charging speed and may drain the battery much faster. The charger should also be compatible with the console and can be left plugged overnight to fully charge it.


The first step in how to charge a 3DS with a mobile phone charger is to find a charger with the right output amperage. This should match the input amperage of the device, which is 4.6V in this case. If you don’t know the output amperage, you can usually find it printed on the device. Make sure that the charger you choose has the correct output amperage, as a smaller output amperage could cause the device to not charge properly or might even completely burn up.

The next step in how to charge a 3DS with a mobile phone charger is to connect the battery to the USB cable. Connect the small end of the cable to the charging port on the bottom of the 3DS, and then plug the other end of the cable into an available USB port. You will see a red light come on, indicating that the battery is charging. When the battery is fully charged, the light will turn off.

Another option for charging a 3DS with a cell phone charger is to use an external battery pack, such as a portable power bank or a phone charger with an extra long cord. Using these external batteries will ensure that the 3DS stays powered while you are away from home.

If you don’t want to buy a special charging cradle for your Nintendo 3DS, you can use an iPhone Lightning cable to charge it. The iPhone Lightning cable has a smaller size and is less bulky than a traditional USB cable. The cable can be plugged into any USB port, and this way, you can charge your 3DS anywhere, even when you’re away from home.

You can also purchase an adapter for your iPhone if you don’t have a micro USB cable to charge your Nintendo 3DS. These adapters have been around for a while, and can be purchased on Amazon for just a few dollars.


Charging a 3DS can be a challenge. Fortunately, there are a few methods to get your system powered up. One option is to use a portable power bank or phone charger with an extra-long cord. You must make sure the portable power bank has a USB port compatible with the 3DS.

First, connect the micro USB cable to the power source and to the negative lead of your 3DS’ battery. The LED light on the front of the 3DS will turn from green to red to indicate that the system is charging. To check the battery level, go to Settings -> System -> Battery. Once your 3DS is fully charged, you can unplug the USB cable.

Another option is to purchase a GameTech adapter. This cable will convert your iPhone Lightning connector into a 3DS connector. The adapter will cost you about $8 but will allow you to charge your 3DS with multiple sources. You can even play games while it charges!

If you want to use a charger designed for your phone, make sure to check its input and output amperage. The 3DS’ input voltage is 4.6V, while the output of a phone charger is 5V. While these are small differences, if the voltages aren’t the same, you can risk damaging your device.

You can also get a Micro-USB to 3DS adapter. These adapters have been around for quite a while and can be purchased for a few dollars from Amazon. The adapter will convert the proprietary ports into the micro USB or Lightning port. These adapters work with any USB charger and should work just fine for the 3DS.

The Powerwave 3DS AC Adapter is a great accessory for your Nintendo charging needs. It works with most Nintendo handheld consoles, including the 3DS, DSi XL, and other Nintendo games. It also has a separate charging port for the 3DS XL.


If your 3DS has a broken charger port, there are a few things you can do to remedy the situation. These include using a portable power bank or an extra-long phone charger to charge your 3DS. If you don’t have access to these things, you can always try an external battery pack.

First, make sure your phone charger has a USB connection. Then, connect your 3DS to the micro USB port on the phone charger. You should then see a red light on your 3DS. When it is fully charged, unplug the USB cable.

The other option is to use an AC adapter for your 3DS. It’s not recommended, as it will take a longer time to charge and can even damage your 3DS. You can buy a GameTech converter that converts an iPhone Lightning cable to a 3DS charging cable, which costs $8.

If you don’t want to spend money on a separate cable, you can purchase a generic USB wall cube power adapter. The adapter should have a DC 4.8 to 5.2 V output, and a current of 0.8 to 1.2 A. Beware, however, of smart phone chargers, as their output current tends to be higher than recommended. When pushed too hard, these chargers may damage your Nintendo 3DS by causing it to overheat.

You can also use a Micro USB to 3DS adapter. These adapters are readily available online. Micro USB cable adapters are great solutions for iPhone users who want to keep their 3DS powered up while traveling. Micro USB power adapters are available for a few dollars on Amazon.

When using a phone charger to charge a Nintendo 3DS, you should be careful to check the type of USB cable. Some adapters are not compatible with the 3DS. The first option works for the “New” 3DS, while the latter is compatible with the Original 3DS.

The second option is to purchase a portable USB cable for the Nintendo 3DS. This cable is smaller than the one that came with your iPhone, and it plugs directly into your Nintendo 3DS. It is also compatible with the 3DS XL.

Discover a hidden easter egg

A word from our sponsor


read more


other articles