If you have an iPhone 8, but your home button isn’t working, you can fix it with a few simple steps. First, try calibrating your device. The process requires you to open a stock app, wait for five to ten seconds, then close it. This procedure might not work for you, but it’s a great first step to try.
Fixing a broken iPhone Home button
If you have a broken iPhone Home button, there are a few options available to you. You can take your device to an Apple store to have it fixed, but you can also go to a reputable independent repair shop. You must be aware that not all independent repair shops are as skilled as Apple, so do your research before selecting a repair center.
To start, check to see if the Home button is working on the top, bottom, right, or left. In some cases, the button may be stuck on a specific location and cannot be pressed at all. In these cases, you cannot fix it at home, but you can learn to live with it.
Another option is to restore your iPhone. Make sure to backup your device before you attempt this. This will prevent any loss of data. Besides fixing a broken iPhone home button, you can also use FoneDog iOS System Recovery to repair other errors on your iOS system. The app will restore your iPhone and restore any data on it. However, if you choose this option, you should be aware that the problem may result in your iPhone becoming unusable again.
To fix a broken iPhone home button, you must have the proper tools and a little bit of knowledge. Using the right tools and a simple DIY guide, you can replace the home button and get it working again. Once you replace the broken home button, you will be able to use Touch ID and resume normal functions.
If you cannot press the iPhone home button, you should check if your device is under warranty. If it does, take it to a repair shop or an authorized iPhone repair center. Otherwise, follow the instructions in the video below. If the problem persists, follow the steps mentioned in the video to repair your iPhone home button.
If the iPhone Home button is not working after restoring it, you can restore it by connecting the device to iTunes. To do this, connect the device to iTunes and click on the restore option. Once restored, slide the power button to turn it off. Then, simply follow the same steps to turn it back on again. This method should solve your iPhone home button issue. Sometimes the broken button is caused by dirt and moisture attracting to it. Light cleaning can help.
Restoring your iPhone
If the iPhone 8 home button does not work anymore, you can try restoring it by connecting it to iTunes and choosing the restore option. After restoring the iPhone, you will have to hold the sleep button down and slide to turn it off. Once you have done this, turn the phone on again and the problem should be solved. The problem could be caused by the home button being damaged or attracting moisture or dirt. You can clean this problem by lightly cleaning the affected part of the button.
Connecting your iPhone to your computer can be a daunting task, but you must first get your iOS device into recovery mode. In the recovery mode, your device will be completely black. The iPhone will then show you a black screen, but you can still press the home button to press it. The screen will also be stuck on the Apple logo for a while. Once you get it to this point, you must wait for a few minutes as the computer scans for the device.
Another way to fix your iPhone 8 home button is to update the software. You might need to update your iPhone to a new version of iOS. This will fix any minor bugs that are present in the older software. If the problem still persists, you can try a professional repair service.
If you’ve tried the above solutions and it didn’t work, then you should consider getting the iPhone repaired. You can do this at an Apple store if it’s new and under a year old. Otherwise, you can try a third-party repair shop. Keep in mind, however, that restoring your iPhone will still involve some upfront costs.
Cleaning your iPhone’s Home button
If your home button on your iPhone has become dirty, you can clean it easily using alcohol. You can find isopropyl alcohol at hardware stores. It should be able to loosen dirt and dust from your iPhone. Before cleaning the button, you should ensure that the alcohol doesn’t damage the internal components of your phone.
Your iPhone’s home button may become dirty due to many reasons. For instance, lint from your pockets or dust from your Cheetos may be accumulated on it. To remove dirt, you can apply some alcohol using a cotton swab and then rub it gently over the button.
While it is unlikely that you will accidentally drop your iPhone on a hard surface, it is still possible to damage the home button. If your iPhone is less than a year old, you can use Apple’s one-year warranty to repair the problem free of charge. If your phone is damaged beyond repair, you may have to replace it.
First, open the iPhone and remove the back plate holding the button in place. Afterward, check whether the button is mushy. If so, clean it with isopropyl alcohol or compressed air. You may also need to vacuum the surrounding area. Regardless of what the cause, cleaning the iPhone’s Home button is essential to keep the device working well.
Cleaning your iPhone’s Home button will remove dirt, grime, and dust. It is important that you unplug the device while cleaning it, and make sure you use a soft, lint-free cloth. Never use household cleaners, window cleaners, or aerosol sprays to clean your iPhone. Also, never use solvents or hydrogen peroxide when cleaning the device.
Changing the intensity of your iPhone’s Home button
If you use your iPhone 7 Plus often, you may want to adjust the intensity of the Home button’s click. There are three options available: light, medium, and heavy. By changing the intensity, you can adjust the feel of the Home button while you’re using it.
The home button on Apple’s new premium models has a more advanced solid-state design and a Taptic engine. Both of these features are enhanced when it comes to clicking speed. You can customize the Home button intensity by simply using the same interface you used when setting up your phone during the initial setup process.
In the General section of the Settings app, tap the Home Button. Previously, this option was available only in the Accessibility settings. There, you can choose between Light and Medium, and then press it again to change its intensity. This allows you to adjust the intensity of the click without having to close Settings.
Once you’ve chosen the right level, you can test it. The Home Button has three levels of intensity, the lightest one being the least powerful, the second the strongest, and the third the strongest. Usually, users choose the second option. If you’re not happy with either of these, you can experiment with the other two options to find what feels best for you.
Another option for tweaking the iPhone’s Home button is to recalibrate it. Although this process isn’t official, it can be very effective for fixing broken buttons. Just be sure to check the instructions on your device and try the process again if it doesn’t work.
